2023-2026 Toyota Highlander Platinum Driver Side Mirror With Camera & Power Fold OEM 87940-0E750
Product Details
The 2023-2026 Toyota Highlander Platinum Driver Mirror is a premium front-left exterior mirror assembly for compatible fourth-generation Toyota Highlander Platinum models equipped with Panoramic View Monitor, power folding, reverse tilt, heated glass, turn-signal lighting and Blind Spot Monitor functionality. On North American left-hand-drive vehicles, the left-hand mirror is the driver-side mirror.
The principal Toyota OEM reference for the later Highlander panoramic-view configuration is 87940-0E750. Toyota dealer-backed parts catalogs identify this number as the left-side mirror assembly with reverse tilt and surround/Panoramic View Monitor, while 2025 Highlander catalogs continue to list the same part for camera-equipped applications. Toyota production data also identifies 87940-0E750 in Highlander applications continuing into the 2026 model year.
An important model-year qualification applies to the supplied title. 2023 is a transition year for this mirror family. Earlier 2023 Highlander Platinum/Panoramic View Monitor applications can use 87940-0E362, while later 2023-on configurations use 87940-0E750 depending on powertrain and production specification. Therefore, the 2023-2026 Toyota Highlander Platinum Driver Mirror should always be matched using VIN and the number on the original mirror rather than model year alone.
This mirror is suitable for Toyota collision centers, body shops, vehicle rebuilders, Highlander specialists, automotive electrical repair businesses, used-parts distributors, exporters and wholesale automotive buyers.
Toyota OEM 87940-0E750
The main identification details include:
- Toyota OEM Number: 87940-0E750
- Part Description: Outer Rear View Mirror Assembly, LH
- Position: Front Left / Driver Side
- Vehicle: Toyota Highlander
- Relevant Years: 2023–2026 on compatible applications
- Surround View: Yes
- Panoramic View Monitor: Yes
- Reverse Tilt: Yes
- Power Folding: Applicable premium configuration
- Mirror Heating: Applicable Platinum configuration
- Turn Signal: Applicable premium configuration
- Blind Spot Indicator: Applicable equipped configuration
- Mirror Cover: Separately serviced
Toyota dealer catalogs describe 87940-0E750 as “Highlander. Left. With reverse tilt, with surround view.”
2023-2026 Highlander Platinum Compatibility
The 2023-2026 Toyota Highlander Platinum Driver Mirror is intended for compatible fourth-generation Highlanders using Toyota’s high-specification mirror system.
Toyota confirmed that beginning with the 2023 Highlander, Limited and Platinum grades received power-folding exterior mirrors as standard equipment. Toyota also states that the Platinum grade includes a Bird’s Eye View/Panoramic View Monitor system.
For the current 2026 Highlander, Toyota confirms that Limited and Platinum models feature power-folding heated exterior mirrors with turn-signal and blind-spot warning indicators, while Platinum includes the Panoramic View Monitor.
This establishes the correct feature combination for the high-spec mirror, although the exact physical OEM number still needs VIN confirmation.
2023 Fitment Requires Extra Attention
The 2023 Toyota Highlander can show more than one camera-equipped driver mirror in Toyota’s catalog.
Toyota lists:
87940-0E362
Driver side, Panoramic View Monitor.
and:
87940-0E750
Driver side, Panoramic View Monitor for later/newer powertrain applications.
Toyota’s 2023 parts catalog shows both assemblies because the model year contains different production and powertrain configurations.
Therefore, do not automatically replace a 2023 mirror marked 87940-0E362 with 87940-0E750 without VIN verification.
87940-0E362 Earlier Camera Mirror
OEM 87940-0E362 is a genuine Toyota driver-side mirror assembly specifically documented with:
Panoramic View Monitor / surround-view camera
and is cataloged for 2021–2023 Highlander applications.
Replacement-lighting/body-parts data also describes 87940-0E362 as including:
- Power folding
- Heating
- Turn signal
- Side-view camera
- Memory
- Puddle lamp
on applicable Highlander configurations.
For an early 2023 Highlander, the existing OEM label should therefore be checked before ordering the 2023-2026 Toyota Highlander Platinum Driver Mirror.
87940-0E750 Later Surround-View Mirror
For later Highlander production, the primary camera-equipped LH mirror becomes:
87940-0E750
Toyota catalogs this as:
Left / Driver Side
With Reverse Tilt
With Surround View
for 2023–2025 Highlanders in multiple genuine Toyota dealer catalogs.
Toyota production catalog data for a 2025 Highlander VIN lists 87940-0E750 from November 2023 through August 2026 for applicable Panoramic View Monitor configurations, supporting continued fitment through the 2026 model year.
For this reason, 87940-0E750 is the best primary SEO/OEM reference for the later 2023–2026 camera-equipped Platinum mirror, while still requiring VIN verification for early 2023 vehicles.
Panoramic View Monitor Camera
The camera fitted under the exterior mirror contributes to Toyota’s multi-camera Panoramic View Monitor system.
Toyota describes the 2026 Platinum Panoramic View Monitor as providing a rotating view around the vehicle by combining multiple camera feeds.
The 2023-2026 Toyota Highlander Platinum Driver Mirror must therefore be distinguished from a visually similar mirror without the lower camera.
Toyota also catalogs:
87940-0E740 – Left mirror with reverse tilt, without surround view
alongside:
87940-0E750 – Left mirror with reverse tilt, with surround view.
These two mirrors should not be interchanged when the vehicle requires Panoramic View Monitor functionality.
Power-Folding Function
Power folding became standard on Limited and Platinum Highlander grades for 2023.
Toyota’s 2023 parts catalog separately identifies the driver’s mirror switch as:
84872-0E141 – With Reverse Tilt, With Power Fold
confirming the premium mirror system’s electrically folding configuration.
This should not be confused with a manual-fold mirror found on lower-spec Highlander configurations.
A replacement 2023-2026 Toyota Highlander Platinum Driver Mirror should retain the power-fold system when replacing the factory Platinum mirror.
Reverse Tilt Function
Toyota describes OEM 87940-0E750 as having reverse tilt.
Reverse tilt allows the exterior mirror to change position during reverse operation on appropriately configured vehicles, improving visibility near the curb or rear wheel area.
Because this function depends on vehicle electronics, memory settings and actuator configuration, the mirror wiring and connector must match the receiving Highlander.
Heated Mirror Glass
Toyota’s current Highlander equipment specifications state that Limited and Platinum models use heated power-folding outside mirrors.
Heating helps remove condensation, frost and light ice from the mirror glass.
The replacement mirror should retain the correct heating connections.
However, if only the bare housing is supplied and the glass is absent, heated-glass functionality should not be advertised as physically included.
Blind Spot Monitor Indicator
Toyota confirms Blind Spot Monitor with Rear Cross-Traffic Alert equipment on Highlander upper trims, and the current premium exterior mirrors incorporate blind-spot warning indicators.
The 2023-2026 Toyota Highlander Platinum Driver Mirror therefore needs the correct BSM-compatible glass when replacing a Platinum mirror.
A mirror housing alone does not necessarily include the actual BSM indicator glass.
Verify the physical glass before quotation.
Turn-Signal Lamp
Toyota’s premium Highlander outside mirrors include integrated turn-signal indicators.
The turn-signal lamp is a separately identifiable service component in Toyota’s mirror assembly diagrams, so it should only be advertised as included when physically attached to the supplied mirror.
For used assemblies, test the lamp before shipment where practical.
Puddle Lamp 2023-2026 Toyota Highlander Platinum Driver Mirror
Limited and Platinum Highlanders also use puddle lamps, with Toyota’s current specification describing integrated Highlander-logo puddle lighting on premium models.
Toyota catalogs the puddle lamp separately within the outside-mirror assembly.
Therefore, do not automatically assume a bare mirror housing includes a working puddle lamp.
Memory Function
Premium Highlander seating and mirror systems can integrate with driver-memory settings.
Aftermarket/OE replacement data for earlier camera mirror 87940-0E362 explicitly lists memory as part of the high-spec mirror configuration. 2023-2026 Toyota Highlander Platinum Driver Mirror
When transferring between model years, the connector, actuator and memory capability should be checked rather than assuming all powered Highlander mirrors use identical wiring.
Mirror Cover Is Separate
Toyota sells the exterior painted mirror cover separately from the main mirror assembly.
For example, Toyota’s 2024 mirror catalog lists multiple 87945-0E070-xx left-side covers according to paint color. 2023-2026 Toyota Highlander Platinum Driver Mirror
This means OEM 87940-0E750 should not automatically be advertised as including a body-color cap.
Possible cover colors include Toyota finishes such as:
- Platinum White Pearl
- Magnetic Gray Metallic
- Silver
- Blueprint / dark blue
- Other model-year colors 2023-2026 Toyota Highlander Platinum Driver Mirror
The exact paint code must be confirmed from the supplied cap.
Complete Mirror vs Bare Assembly
When advertising the 2023-2026 Toyota Highlander Platinum Driver Mirror, itemize what is actually present. 2023-2026 Toyota Highlander Platinum Driver Mirror
A used complete mirror may contain:
- Main mirror housing
- Power-fold actuator
- Mirror glass
- Heating element
- Blind-spot indicator
- Turn-signal lamp
- Panoramic View Monitor camera
- Puddle lamp
- Lower covers
- Painted outer cap
- Wiring connector 2023-2026 Toyota Highlander Platinum Driver Mirror
A new Toyota mirror assembly may service certain trim components separately.
Never assume every subcomponent shown in a product photograph is included unless physically verified.
Camera Calibration and Testing
Because the side camera forms part of the Panoramic View Monitor system, professional installation is recommended. 2023-2026 Toyota Highlander Platinum Driver Mirror
After collision or mirror replacement, technicians should check:
- Camera image
- Mirror adjustment
- Power folding
- Reverse tilt
- Blind Spot Monitor indicator
- Heater
- Turn signal
- Puddle light
- Electrical connectors 2023-2026 Toyota Highlander Platinum Driver Mirror
Camera calibration or initialization may be required according to Toyota repair procedures and the nature of the repair. 2023-2026 Toyota Highlander Platinum Driver Mirror
Information Required Before Ordering
Provide:
- Toyota Highlander model year
- VIN
- Platinum confirmation
- Gasoline or Hybrid
- Original mirror OEM number
- Panoramic View Monitor: yes
- Power fold: yes
- Reverse tilt requirement
- BSM requirement
- Connector photographs
- Painted cap requirement
- New OEM, used OEM or aftermarket requirement
- Quantity
- Delivery destination 2023-2026 Toyota Highlander Platinum Driver Mirror
Request a Quote
For pricing and availability of the 2023-2026 Toyota Highlander Platinum Driver Mirror, provide the VIN, model year, original mirror number, powertrain, required condition, quantity and shipping destination.
For the later Panoramic View Monitor configuration, Toyota OEM 87940-0E750 is the primary driver-side reference and is documented as a left mirror with reverse tilt and surround view. Toyota production information supports its use into 2026. Earlier 2023 Highlanders may instead use 87940-0E362, so VIN confirmation is important before shipment. 2023-2026 Toyota Highlander Platinum Driver Mirror
Exact OEM/aftermarket status, camera, glass, BSM indicator, heater, power-fold mechanism, turn signal, puddle lamp, cover, wiring, paint color, packaging, MOQ, availability and freight terms must be confirmed from the actual supplied mirror. 2023-2026 Toyota Highlander Platinum Driver Mirror













Reviews
There are no reviews yet.