Beluga Racing Lightweight Performance Straight Axle-Back Exhaust for 2018-2023 Toyota Camry 2.5L & 3.5L – Quad Tips

Product Details

The Beluga Racing Toyota Camry Axle-Back Exhaust is a lightweight performance rear exhaust system designed for compatible 2018–2023 Toyota Camry 2.5L and 3.5L front-wheel-drive models. Manufactured from T-304 stainless steel and finished with quad beveled exhaust tips, this axle-back system is intended for Camry owners seeking a more aggressive exhaust appearance and deeper exhaust tone without replacing the vehicle’s complete exhaust system.

Beluga Racing’s official product listing confirms fitment for 2018–2023 Toyota Camry 2.5L and 3.5L models, but specifically states that the system does not fit AWD Camrys. The manufacturer also specifies T-304 stainless construction, mandrel-bent piping, TIG welding, quad beveled tips, supplied bolts and gaskets, and a one-year manufacturer warranty.

The Beluga Racing Toyota Camry Axle-Back Exhaust is suitable for performance workshops, Toyota tuning specialists, exhaust shops, automotive accessories distributors, vehicle customizers, exporters, and wholesale buyers looking for a model-specific XV70 Camry rear exhaust upgrade.

Confirmed Manufacturer Fitment

Beluga Racing officially lists this system for:

• 2018 Toyota Camry 2.5L
• 2018 Toyota Camry 3.5L
• 2019 Toyota Camry 2.5L
• 2019 Toyota Camry 3.5L
• 2020 Toyota Camry 2.5L
• 2020 Toyota Camry 3.5L
• 2021 Toyota Camry 2.5L
• 2021 Toyota Camry 3.5L
• 2022 Toyota Camry 2.5L
• 2022 Toyota Camry 3.5L
• 2023 Toyota Camry 2.5L
• 2023 Toyota Camry 3.5L

The manufacturer’s most conservative published fitment range remains 2018–2023. Some marketplace listings extend the application to 2024, but because Beluga Racing’s own current page states 2018–2023, this product page should retain the manufacturer’s verified range unless Beluga Racing or the actual supplier confirms 2024 compatibility in writing.

Front-Wheel Drive Only

One of the most important fitment requirements for the Beluga Racing Toyota Camry Axle-Back Exhaust is drivetrain.

Beluga Racing explicitly states:

Does not fit AWD / all-wheel-drive Camry models.

This distinction is particularly important on later XV70 Camrys, where certain 2.5L models were available with AWD.

Customers should therefore provide:

• Model year
• Engine
• FWD confirmation
• Trim
• VIN where available

before ordering.

A 2.5L engine alone does not guarantee fitment.

2.5L Four-Cylinder Compatibility

The Beluga Racing Toyota Camry Axle-Back Exhaust is manufacturer-listed for compatible Camrys equipped with the 2.5L four-cylinder engine.

This makes it relevant to numerous LE, SE, XLE and XSE configurations when the vehicle uses the appropriate front-wheel-drive exhaust layout.

However, trim and lower rear bumper/diffuser design can affect tip clearance even when the exhaust mounting arrangement is compatible.

Buyers should therefore check the rear bumper configuration before installation.

3.5L V6 Compatibility

Beluga Racing also specifically identifies the system for 3.5L Camry models.

This includes compatible XV70 Camry V6 applications using the correct FWD rear exhaust configuration.

The Beluga Racing Toyota Camry Axle-Back Exhaust should therefore not be confused with a 2.5L-only aftermarket system.

Because the same Beluga Racing product is advertised for both engine sizes, commercial listings can accurately mention:

2018–2023 Camry 2.5L & 3.5L FWD

provided drivetrain and body clearance are verified.

T-304 Stainless Steel Construction

Beluga Racing specifies T-304 stainless steel construction for the system.

T-304 stainless steel is widely used for performance exhaust components because of its corrosion resistance and suitability for high-temperature exhaust applications.

The manufacturer also describes the Beluga Racing Toyota Camry Axle-Back Exhaust as lightweight.

However, Beluga Racing does not provide a verified system weight on the official listing, so TG-Trading should not advertise a specific kilogram or pound figure without measuring the actual supplied product.

Mandrel-Bent Exhaust Piping

Beluga Racing states that the exhaust uses mandrel-bent piping and that the pipes are inspected to promote smooth, even airflow.

Mandrel bending is commonly used in performance exhaust construction because it helps maintain a more consistent pipe cross-section through bends compared with heavily crushed conventional bends.

This design is intended to support exhaust flow while maintaining the routing required beneath the Camry’s rear body.

TIG-Welded Construction

The Beluga Racing Toyota Camry Axle-Back Exhaust uses high-quality TIG-welded construction, according to the manufacturer.

TIG welding allows precise fabrication of stainless-steel exhaust components and is commonly used on performance exhaust systems where joint quality and appearance are important.

Actual weld condition should still be inspected before supplying the product, particularly where the system has been stored, transported, or previously installed.

Quad Beveled Exhaust Tips

One of the most visible features of this system is its quad-tip rear appearance.

Beluga Racing specifies:

Quad beveled tips

and identifies the tip size as approximately:

3.5 inches.

Current marketplace data for the same Beluga Racing system also describes the outlet configuration as quad 3.5-inch tips.

This creates a sportier rear appearance than a standard Camry exhaust configuration.

The term quad refers to the visible four-tip arrangement rather than four separate complete exhaust systems.

Diffuser and Bumper Clearance

The larger exhaust tips require special attention to rear bumper clearance.

Beluga Racing states that because of the larger tips, some models may require trimming of the lower diffuser or installation of a diffuser with larger exhaust openings.

A current reseller listing for the same system also warns that TRD-related rear openings can require trimming.

For this reason, buyers should provide photographs of the rear bumper when ordering for:

• Camry TRD
• Vehicles with aftermarket diffusers
• Modified rear bumpers
• Custom body kits

The Beluga Racing Toyota Camry Axle-Back Exhaust should not be described as guaranteed zero-modification fitment on every rear bumper design.

Axle-Back – Not a Full Cat-Back Exhaust

This product is an axle-back exhaust system.

An axle-back replaces the rear section of the exhaust system rather than the complete exhaust system from the catalytic converter rearward.

Therefore, it should not be confused with:

• Exhaust header
• Downpipe
• Front pipe
• Catalytic converter
• Mid-pipe
• Complete cat-back system

The Beluga Racing Toyota Camry Axle-Back Exhaust is designed primarily to alter the rear exhaust section, exterior tip styling, weight, airflow characteristics, and exhaust sound.

Catalytic Converters Are Not Replaced

Because this product is a rear axle-back system, it is not the same type of component as a catalytic-converter-delete header or test pipe.

The factory upstream emissions-control system remains a separate part of the vehicle’s exhaust layout.

However, exhaust noise regulations can still apply to aftermarket axle-back systems even where catalytic converters remain installed.

Buyers should confirm local requirements before using the system on public roads.

Aggressive Deep Exhaust Tone

Beluga Racing describes the system as producing an aggressive deep tone.

Actual sound can vary according to:

• 2.5L vs 3.5L engine
• Factory mid-pipe
• Additional exhaust modifications
• Catalytic converter configuration
• Intake modifications
• Engine load and RPM

For this reason, TG-Trading should not claim a specific decibel level unless independently measured.

Bolts and Gaskets Included

Beluga Racing states that the system comes with:

• Brand-new bolts
• Gaskets

for installation.

A current listing also describes the system as a rear axle-back kit with bolts and gasket included.

Exact package contents should nevertheless be checked against the physical stock before dispatch.

Do not automatically assume additional clamps, hangers, rubber isolators, or installation tools are supplied unless confirmed.

Manufacturer Warranty

Beluga Racing’s current product page states that the exhaust comes with a one-year warranty.

Warranty terms, territorial coverage, proof-of-purchase requirements, installation conditions, and exclusions should be checked against the manufacturer’s current policy at the time of sale.

TG-Trading should not extend the manufacturer’s warranty beyond the terms actually offered.

Professional Installation Recommended

Professional installation of the Beluga Racing Toyota Camry Axle-Back Exhaust is recommended.

The installer should inspect:

• Factory flange condition
• Exhaust hangers
• Gaskets
• Mounting bolts
• Exhaust alignment
• Tip clearance
• Rear diffuser clearance
• Underbody clearance

After installation, both sides should be aligned so that the quad tips sit evenly within the rear bumper openings.

Exhaust leaks should also be checked before the vehicle is returned to service.

Suitable for B2B Buyers

The Beluga Racing Toyota Camry Axle-Back Exhaust is suitable for:

Performance Shops

For customers seeking a sportier Camry exhaust setup.

Exhaust Specialists

For installation and rear exhaust modification.

Toyota Tuning Businesses

For XV70 Camry performance and appearance upgrades.

Automotive Parts Distributors

For stocking branded aftermarket exhaust components.

Exporters and Wholesalers

For international commercial supply subject to confirmed application and availability.

Information Required Before Ordering

Customers should provide:

• Toyota Camry model year
• 2.5L or 3.5L engine
• FWD confirmation
• Trim level
• Rear diffuser configuration
• VIN where required
• Required quantity
• Delivery destination

For TRD or modified rear bumper applications, photographs are recommended.

Request a Quote

For pricing and availability of the Beluga Racing Toyota Camry Axle-Back Exhaust, provide the Camry model year, 2.5L or 3.5L engine specification, FWD confirmation, trim, quantity, and shipping destination.

Beluga Racing officially describes the product as a T-304 stainless-steel lightweight straight axle-back exhaust with quad beveled 3.5-inch tips, mandrel-bent piping, TIG welding, bolts and gaskets, for 2018–2023 Camry 2.5L and 3.5L applications. The manufacturer specifically excludes AWD vehicles.

Exact inventory, tip finish, package contents, diffuser modification requirements, warranty applicability, packaging, MOQ, and freight terms must be confirmed for the actual supplied system.  2018-2023 Toyota Camry Axle-Back Exhaust