2016-2018 Nissan Altima Front Bumper Cover

Product Details

The 2016-2018 Nissan Altima Front Bumper Cover is a replacement front exterior fascia for compatible Nissan Altima sedans from the 2016, 2017, and 2018 model years. It is suitable for replacing an original bumper cover damaged by a frontal collision, cracking, deep scratches, broken mounting points, vandalism, or previous poor-quality body repairs.

Nissan’s official parts catalog confirms two principal bumper-cover configurations for this model range: 62022-9HS0H for vehicles without front parking sensors and 62022-9HS2H for vehicles with front parking sensors. Both are specifically documented for 2016–2018 Nissan Altima applications.

The 2016-2018 Nissan Altima Front Bumper Cover is suitable for collision repair centers, automotive body shops, Nissan specialists, vehicle rebuilders, auto-parts distributors, exporters, and wholesale buyers requiring replacement Altima exterior body components.

Because parking-sensor equipment changes the correct bumper reference, customers should verify the VIN, original bumper configuration, and sensor requirement before ordering.

2016-2018 Nissan Altima Compatibility

The 2016-2018 Nissan Altima Front Bumper Cover is documented for compatible:

• 2016 Nissan Altima
• 2017 Nissan Altima
• 2018 Nissan Altima

Depending on model year and specification, potential applications include selected:

• Altima S
• Altima SR
• Altima SV
• Altima SL
• 2.5L four-cylinder models
• 3.5L V6 models

Nissan’s official catalog shows the same two bumper-cover references on both 2.5L and 3.5L applications, demonstrating that engine size itself does not determine the bumper cover. The key difference is whether the vehicle has the appropriate parking-sensor specification.

VIN verification remains recommended for B2B orders.

Without Parking Sensors – OEM 62022-9HS0H

For compatible Altimas without front parking sensors, Nissan identifies:

OEM Part Number: 62022-9HS0H
Description: Front Bumper Cover
Model Years: 2016–2018
Sensor Configuration: Without Park Sensors

This is the principal non-sensor version of the 2016-2018 Nissan Altima Front Bumper Cover. Nissan lists it directly alongside the sensor-equipped version in the official front bumper assembly.

Customers should not order this version for a vehicle requiring factory parking-sensor openings without first confirming that the configuration is correct.

With Parking Sensors – OEM 62022-9HS2H

For compatible vehicles equipped with front parking sensors, Nissan lists:

OEM Part Number: 62022-9HS2H
Description: Front Bumper Cover
Model Years: 2016–2018
Sensor Configuration: With Park Sensors

The official Nissan catalog identifies 62022-9HS2H separately from the non-sensor 62022-9HS0H cover.

When sourcing the 2016-2018 Nissan Altima Front Bumper Cover, buyers should inspect the damaged original bumper for parking sensors or provide the VIN so the correct version can be selected.

Parking Sensors Are Not Automatically Included

A bumper designed for parking sensors does not mean that the actual sensors are automatically supplied.

Depending on the product, the 2016-2018 Nissan Altima Front Bumper Cover may be offered as:

• Bare bumper cover
• Bumper cover with sensor openings
• Used assembly with selected attached parts

Parking sensors, wiring, brackets, and other electronic components should only be described as included if they are physically present and verified.

Fog Lamp Trim Differences

Nissan separately catalogs the lower side trim pieces according to whether the vehicle has fog lamps.

For 2016–2018 applications, the official catalog lists different right- and left-side hole covers or fog-light trims for:

• Vehicles with fog lamps
• Vehicles without fog lamps

For example, Nissan lists 62256-9HS0B and 62257-9HS0B for applicable fog-lamp configurations, while 62256-9HS0A and 62257-9HS0A are listed for vehicles without fog lamps.

These components are separate from the 2016-2018 Nissan Altima Front Bumper Cover itself.

Therefore, the bumper cover should not automatically be advertised as including fog-light bezels or lamps.

Lower Grille Is Separate

Nissan lists the lower front grille separately as:

62254-9HS1A – Lower Grille

for the 2016–2018 front bumper system.

If the replacement 2016-2018 Nissan Altima Front Bumper Cover is supplied without the grille, the buyer may need to transfer a serviceable original grille or source a replacement.

A complete-looking used bumper may include the grille, but this should be confirmed individually.

Bumper Reinforcement Is Separate

The visible bumper cover is not the same as the structural crash reinforcement behind it.

Nissan’s official parts diagram lists the following independently:

• Bumper cover
• Energy absorber
• Reinforcement beam
• Mounting brackets
• Lower retainer
• Upper stiffener

The reinforcement beam is specifically listed as a separate 2016–2018 component.

The 2016-2018 Nissan Altima Front Bumper Cover should therefore not be described as a complete structural bumper assembly unless the reinforcement and related components are actually supplied.

Energy Absorber

The energy absorber located behind the bumper fascia is also serviced separately.

Nissan’s front bumper catalog identifies an energy absorber for the 2016–2018 Altima independently from the outer bumper cover.

Following a collision, technicians should inspect the absorber even when it appears that only the visible bumper is damaged.

A compressed or broken absorber may also require replacement.

Side Mounting Brackets

Correct installation depends on undamaged side mounting components.

Nissan lists:

62220-9HS0A – Right Side Bumper Bracket

and:

62221-9HS0A – Left Side Bumper Bracket

for the 2016–2018 Altima front bumper system.

Broken brackets can cause the 2016-2018 Nissan Altima Front Bumper Cover to sag or separate near the fenders.

Inspect both sides before installation.

Tow Eye Cover and License Plate Bracket

Additional separately serviced components include:

622A0-9HS0A – Tow Eye Cap

and:

96210-9HS0A – Front License Plate Bracket

for applicable 2016–2018 Altimas.

These pieces should not automatically be assumed included with a bare replacement bumper.

OEM vs Aftermarket Bumper Cover

OEM numbers 62022-9HS0H and 62022-9HS2H are Nissan references.

However, aftermarket manufacturers can produce compatible replacement bumper covers using those numbers as cross references.

Therefore:

Genuine Nissan OEM should only be stated when Nissan manufacture is verified.

Otherwise, describe the product as:

Replacement bumper cover compatible with OEM 62022-9HS0H or 62022-9HS2H.

This keeps the listing accurate for commercial buyers.

Primed, Painted or Used Condition

The 2016-2018 Nissan Altima Front Bumper Cover can potentially be supplied in different conditions, including:

• New primed replacement
• Genuine new OEM
• Used original Nissan bumper
• Reconditioned bumper
• Previously painted bumper

Do not assume a specific color, primer, or finish unless confirmed from the actual inventory.

A used painted bumper may still require refinishing because paint shade can vary with age, sun exposure, and previous repairs.

Used Bumper Inspection

When supplying a used 2016-2018 Nissan Altima Front Bumper Cover, inspect:

• Outer surface
• Upper mounting points
• Side mounting tabs
• Lower mounting points
• Sensor openings
• Grille mounting points
• Fog-trim mounting points
• Tow-eye opening

Check for:

• Cracks
• Deep scratches
• Distortion
• Broken tabs
• Previous plastic welding
• Filler repairs
• Paint damage
• Missing components

Photographs of both the front and rear surfaces are recommended.

Professional Installation Recommended

Professional body-shop installation is recommended.

Technicians should check the bumper’s alignment with:

• Hood
• Headlights
• Front fenders
• Grille
• Wheel-arch liners
• Underbody shields

If the Altima was involved in a front collision, surrounding brackets, reinforcement, radiator-support components, and headlights should also be inspected before installing the 2016-2018 Nissan Altima Front Bumper Cover.

Suitable for B2B Automotive Buyers

This bumper cover is suitable for collision repair centers, body shops, Nissan repair specialists, vehicle rebuilders, parts distributors, salvage businesses, exporters, and wholesale automotive buyers.

Commercial orders should distinguish sensor and non-sensor versions to reduce incorrect fitment and returns.

Information Required Before Ordering

For accurate quotation, provide:

• Nissan Altima model year
• Trim level
• VIN where available
• With or without front parking sensors
• With or without fog lamps
• Existing bumper OEM number
• Bare or complete assembly requirement
• Required quantity
• Delivery destination

Request a Quote

For pricing and availability of the 2016-2018 Nissan Altima Front Bumper Cover, provide the vehicle year, VIN, parking-sensor configuration, quantity, and shipping destination.

Use 62022-9HS0H for compatible vehicles without parking sensors and 62022-9HS2H for compatible vehicles with parking sensors.

Exact OEM or aftermarket status, finish, grille, fog trims, parking sensors, reinforcement, absorber, brackets, packaging, MOQ, stock, and delivery terms must be confirmed for the actual product being supplied.