2018-2024 Toyota Camry Panoramic Sunroof Frame Repair Spare Parts

Product Details

The Toyota Camry Panoramic Sunroof Parts range covers replacement frame, housing, glass, drive, mounting, sealing, sunshade and supporting components for compatible 2018–2024 XV70 Toyota Camry models equipped with the factory panoramic glass roof. These parts are intended for repairing panoramic roof systems affected by collision damage, broken mechanisms, jammed sliding panels, damaged cables, water leakage, cracked glass, failed motors or worn guide components.

Toyota offered more than one roof system on the XV70 Camry. Depending on trim and equipment, a vehicle may have no sunroof, a conventional power tilt/slide moonroof, or the larger panoramic glass roof with a powered front sliding section. Toyota’s 2024 brochure confirms that the panoramic glass roof was associated with upper XLE/XSE configurations, while conventional power moonroofs were offered on other configurations.

For this reason, Toyota Camry Panoramic Sunroof Parts must not be treated as interchangeable with standard Camry moonroof parts. Buyers should provide the VIN, model year, trim and photographs of the damaged roof assembly before ordering.

Verified Panoramic Roof Applications

Toyota’s 2018 body catalog specifically identifies panoramic-roof configurations for applicable XLE and XSE vehicles, including 2.5L and 3.5L applications. The catalog separately lists standard sunroof, panoramic roof and no-sunroof configurations.

Potential applications include compatible:

• 2018 Toyota Camry XLE
• 2018 Toyota Camry XSE
• 2019 Toyota Camry XLE/XSE
• 2020 Toyota Camry XLE/XSE
• 2021 Toyota Camry XLE/XSE
• 2022 Toyota Camry XLE/XSE
• 2023 Toyota Camry XLE/XSE
• 2024 Toyota Camry XLE/XSE

Equipment differs by powertrain, trim and package. Toyota’s 2024 documentation shows the panoramic glass roof with front power tilt/slide moonroof as available on XLE/XSE and standard on certain V6 versions.

The Toyota Camry Panoramic Sunroof Parts listing should therefore use VIN verification rather than assuming every XLE or XSE has the panoramic roof.

Complete Panoramic Roof Housing Assembly

For panoramic-equipped Camrys, Toyota catalogs complete Housing Sub-Assembly, Sliding Roof assemblies.

Examples include:

63203-06123-B0
Panoramic roof housing assembly with gray sunshade.

63203-06123-E0
Panoramic roof housing assembly with beige sunshade.

Earlier 2018 configurations can also show:

63203-06163-B0
Gray sunshade, panoramic configuration without the applicable satellite-radio setup.

63203-06163-E0
Beige sunshade equivalent.

Toyota’s 2018 catalog distinguishes these full panoramic assemblies according to interior sunshade color and equipment configuration.

These complete assemblies should not be confused with the smaller 63203-06110 standard sunroof frame, which Toyota catalogs separately for conventional U.S.-built moonroof applications.

Panoramic Sliding Glass

The front movable glass is separately serviceable.

A key panoramic reference is:

63201-06151 – Sliding Roof Glass Sub-Assembly

Toyota lists this glass specifically for panoramic-roof applications. An earlier reference 63201-06150 was replaced by 63201-06151.

Therefore, a customer requiring only cracked front sliding glass does not necessarily need to purchase the complete Toyota Camry Panoramic Sunroof Parts housing assembly.

Before ordering glass, verify:

• Panoramic vs conventional moonroof
• VIN
• Original glass reference
• Mounting condition
• Surrounding molding condition

Rear Panoramic Roof Panel

The panoramic system also includes a larger fixed/rear roof panel assembly.

Toyota lists:

63233-06081 – Sliding Roof Panel Assembly

for applicable panoramic configurations, with equipment and production notes varying by model year. For later 2024 production, Toyota documents the panel from approximately May 2023.

A cracked fixed panoramic panel should not be confused with the front movable 63201-series glass.

When sourcing Toyota Camry Panoramic Sunroof Parts, customers should specify whether they require:

• Front movable glass
• Rear/fixed panoramic panel
• Complete roof housing
• Both glass sections

Panoramic Roof Drive Motors

The panoramic roof uses separate drive equipment.

Toyota catalogs:

63260-06130 – Sliding Roof Drive Gear Assembly #1

and

63260-06121 – Sliding Roof Drive Gear Assembly #2

for applicable panoramic systems.

These are distinct from the 63260-06110 motor used with conventional U.S.-built sunroof systems.

This distinction is important because a customer searching for a “Camry sunroof motor” may otherwise receive the wrong component.

The Toyota Camry Panoramic Sunroof Parts product range should therefore separate panoramic drive motors from standard moonroof motors.

Drive Cable and Sliding Mechanism

A jammed or unevenly moving roof can involve the cable or track mechanism rather than the electric motor itself.

Toyota lists:

63205-0E040 – Sliding Roof Drive Cable Sub-Assembly

for applicable U.S.-built conventional roof systems, while the panoramic assembly contains its own dedicated mechanism and related components.

For panoramic-roof repairs, technicians should inspect:

• Guide tracks
• Sliding shoes
• Cables
• Gear mechanisms
• Panel alignment
• Drive motors
• Mounting brackets

before deciding whether a full housing replacement is required.

Panoramic Roof Mounting Brackets

Toyota separately catalogs several brackets used around the panoramic assembly.

Examples include:

63241-06110 – Front Sliding Roof Bracket

63245-06090 – Rear Sliding Roof Bracket

63243-06090 – Passenger-Side Bracket

63244-06100 – Driver-Side Bracket

These components appear specifically within Toyota’s panoramic roof system.

A collision-damaged roof can require bracket replacement even when the glass itself remains intact.

Therefore, Toyota Camry Panoramic Sunroof Parts should be quoted according to the damaged components rather than automatically as one complete system.

Side Moldings and Garnishes

The panoramic glass uses separately serviced side moldings.

Toyota lists:

63217-06160 – Panoramic Roof Side Molding, RH

and

63218-06120 – Panoramic Roof Side Molding, LH

for applicable configurations.

These exterior garnish pieces can become damaged during glass removal, roof repair or collision work.

They should not automatically be assumed included with replacement glass.

Wind Deflector

Toyota also provides a dedicated wind-deflector assembly.

One documented panoramic reference is:

63209-06101 – Roof Air Deflector

with production notes showing use through approximately February 2022 on applicable configurations.

Because production changes exist, VIN verification is especially important when supplying a wind deflector.

A damaged or improperly positioned deflector can cause increased wind noise when the panoramic roof is open.

Panoramic Sunshade

The panoramic system includes a large retractable interior sunshade.

Examples include:

63306-06120-B0 – Gray Sunshade

with other color-specific versions used according to interior trim. Toyota also catalogs later panoramic housing assemblies in both gray and beige configurations.

A Toyota Camry Panoramic Sunroof Parts order should therefore specify interior color whenever the shade or complete housing assembly is required.

Drainage System

Sunroof assemblies depend on drainage channels and hoses to route rainwater away from the roof opening.

Toyota catalogs separate roof drain hoses on applicable roof systems, including front and rear drainage components.

Water entering the cabin does not automatically mean that the panoramic frame itself is damaged.

Possible causes include:

• Blocked drain tube
• Disconnected drain hose
• Damaged seal
• Incorrect glass alignment
• Cracked drain channel
• Distorted housing
• Previous improper repair

Professional inspection is recommended before replacing expensive Toyota Camry Panoramic Sunroof Parts.

Panoramic Roof vs Standard Moonroof

This distinction is essential.

Toyota catalogs a conventional U.S.-built sunroof housing as:

63203-06110 – Housing Sub-Assembly, Sliding Roof

and a Japan-built conventional version as:

63203-33190.

These should not be confused with the much larger panoramic housing assemblies such as 63203-06123-B0/E0.

A customer with an LE or SE equipped with the conventional power moonroof may require completely different parts from an XLE/XSE panoramic vehicle.

2025 Camry Requires Separate Verification

The requested product title does not specify a year range. For SEO and parts accuracy, the recommended core application is 2018–2024 XV70 Camry.

Toyota redesigned the Camry for 2025, and Toyota states that the new generation offers an optional power tilt-and-slide panoramic roof on XLE and XSE models. That system belongs to the newer vehicle generation and should not automatically be assumed to share XV70 parts.

Therefore, do not combine 2018–2024 and 2025+ panoramic-roof components into one fitment claim without OEM-number verification.

Complete vs Repair Parts

The phrase “sunroof frame repair spare parts” can describe many different items.

A complete Toyota Camry Panoramic Sunroof Parts order may involve:

• Panoramic roof housing/frame
• Front movable glass
• Rear panoramic panel
• Drive motor
• Guide/track components
• Brackets
• Wind deflector
• Sunshade
• Side moldings
• Drain components
• Wiring harness

Each included item should be stated individually.

Do not describe a bare frame as a “complete panoramic sunroof” unless the glass, motors, sunshade and associated mechanisms are physically included.

Professional Installation Recommended

Panoramic roof repair is a complex body and electrical operation.

Professional installation may involve:

• Headliner removal
• Interior trim removal
• Glass alignment
• Roof frame removal
• Motor synchronization
• Drain-hose inspection
• Electrical testing
• Water-leak testing
• Noise testing
• Roof-panel alignment

Incorrect installation can result in water leakage, wind noise, glass binding or motor damage.

Request a Quote

For pricing and availability of Toyota Camry Panoramic Sunroof Parts, provide the Camry year, VIN, trim, panoramic-roof confirmation, interior sunshade color, required components, quantity and shipping destination.

For 2018–2024 XV70 vehicles, Toyota documents multiple panoramic-specific assemblies, including 63203-06123-B0/E0 panoramic housings, 63201-06151 sliding glass, 63233-06081 roof panel, 63260-series panoramic drive motors, mounting brackets, moldings and sunshade components.

Exact OEM or aftermarket status, year supersession, glass inclusion, frame completeness, motors, cables, shade, seals, drains, wiring, packaging, MOQ and availability must be confirmed from the actual supplied parts.